Поиск по сайту

Airspan EasyST-2

EasyST pic

WiMAX CERTIFIED logo

EasyST and ProST CPE products have been developed to work with all WiMAX compliant base stations including all base stations from Airspan. The EasyST is an all-indoor CPE designed for self-install by the end user whereas the ProST is a part indoor- part outdoor CPE which requires professional installation and provides superior link budget in difficult deployment conditions.

The EasyST is a physically compact WiMAX CPE designed to be deployed alongside the end user's PC. With dimensions close to the size of 2 CD jewel cases, EasyST looks great when sitting on a desk or window sill.

The EasyST is designed to be installed by the end user, using a simple-to-use but sophisticated user interface to enable optimum positioning without needing to switch-on the user's PC. This helps improve service availability and reliability whilst increasing service speed and reducing network load.

Three different deployment models are supported: using the integral 4 x 90° antenna; using together with the optional Wi-Fi expansion (thus locating the EasyST by a window); or using an external antenna. In all cases a visual indication system informs the user when the optimum location for RF reception and transmission is achieved.

The latest generation EasyST, called EasyST-2, is based on the Rosedale 2 chipset from Intel and is capable of supporting both Mobile WiMAX and Fixed WiMAX profiles. Simply through software the device can be configured to support one or the other profile.

In addition to the simple-to-use user interface, EasyST also has an in-built Web server, which allows advanced configuration by the end-user or even remote configuration by a network operator's customer service staff. EasyST is designed for combined voice and data deployments. EasyST has two optional "stackable" extension bases, one for Wi-Fi and the other for VoIP and data.

Main Features

  • Supports Mobile WiMAX and Fixed WiMAX profiles
  • World's first "Self-Install" WiMAX CPE
  • Full indoor non-LOS (NLOS) deployment
  • User unpacks, plugs in and surfs - Installation takes less than 1 minute!
  • Stackable "CD" Style Design utilizes latest Intel WiMAX chipset
  • Dual mode operation – capable of supporting both Mobile WiMAX and Fixed WiMAX
  • Optional IEEE 802.11b/g Wi-Fi access point
  • Optional VoIP base for 1or 2 POTS lines
  • A range of antenna options
  • Up to 8.5dBi, 4 x 90º auto selecting antenna
  • Full support for Sub-Channelisation (OFDMA on uplink)
  • Integral SIM card reader
  • "Auto-Connect" and "Auto-Config" features
  • "Fully Nomadic Operation"

EasyST-2 Technical Summary

  EasyST-2
Mobile WiMAX Yes
Fixed WiMAX Yes
Standards Compliance IEEE802.16e-2005
  IEEE802.16-2004
Form Factor Indoor Self-Install
Frequency Bands 1.5 GHz, 3.3 GHz, 3.5 GHz, 3.7 GHz, 4.9 GHz, 5.8 GHz
Channel Size 10 MHz, 7 MHz, 5 MHz, 3.5 MHz, 1.75 MHz
FFT 1024, 512, 256
Duplex Method TDD, FDD
Tx Power (Frequency band dependant) +24 dBm
Rx Sensitivity -103 dBm
STC Yes
MIMO No
MIMO Matrix Type No
CSM Yes
Beamforming No
Uplink Sub-Channelization Yes
PUSC Yes
Fractional Frequency Reuse Yes
Ethernet CS Yes
IP CS Yes
IP version support IPv6, IPv4
User Interface 10/100 bT Ethernet, WiFi, POTs with integrated RGW
End to End VLAN (802.1q) Yes
Supported Usage Scenarios Nomadic, Fixed
Handover Supported Yes
Encryption DES, AES
Authentication PKM, PKMv2, EAP-TLS, EAP-AKA, EAP-SIM

Note: Specifications are subject to change without notice and are for information purposes only.