Поиск по сайту

Aнтенны и аксессуары Cisco Aironet

Every wireless LAN deployment is different. When engineering an in-building solution, varying facility sizes, construction materials, and interior divisions raise transmission and multipath considerations. When implementing a building-to-building solution, distance, physical obstructions between facilities, and number of transmission points must be taken into account.

Cisco is committed to providing the best access points, client adapters, and bridges in the industry-and is also committed to providing a complete solution for any wireless LAN deployment. Cisco has the widest range of antennas, cable, and accessories available from any wireless manufacturer.

Cisco offers a complete range of 2.4 GHz and 5 GHz antennas for access point and bridge equipment that enable a customized wireless solution for almost any installation.

With the Cisco FCC-approved directional and omnidirectional antennas, low-loss cable, mounting hardware, and other accessories, installers can customize a wireless solution that meets the requirements of even the most challenging applications.

ACCESS POINT ANTENNAS

Cisco Aironet 2.4-GHz access point antennas are compatible with all Cisco RP-TNC-equipped access points. The antennas are available with different gain and range capabilities, beam widths, and form factors. Coupling the appropriate antenna and access point allows for efficient coverage in any facility, as well as better reliability at higher data rates (Table 1).

Cisco Aironet 5 GHz access point antennas have RP-TNC connectors and are compatible with Cisco Aironet 1200 Series and 1230AG Series access points when equipped with a RM22A radio module. Selection of the appropriate antenna should provide optimal coverage for the desired application in the 5 GHz frequency band.

Table 1.Cisco Aironet 2.4 GHz Access Point Antennas with RP-TNC Connectors

Feature AIR-ANT5959 AIR-ANT2012 AIR-ANT3213 AIR-ANT2410Y-R
Description Diversity omnidirectional ceiling mount Diversity patch wall mount Pillar mount diversity omnidirectional Yagi mast or wall mount
Application Indoor unobtrusive antenna, best for ceiling mount; excellent throughput and coverage solution in high multipath cells and dense user population Indoor/outdoor, unobtrusive midrange antenna Indoor, unobtrusive midrange antenna Indoor/outdoor directional antenna for use with access points or bridges
Gain Two separate 2-dBi omnidirectional elements; minimum gain of 2.0, maximum gain of 2.35 6.5 dBi with two radiating elements 5.2 dBi with two radiating elements 10 dBi
Frequency 2.4 GHz 2.4 GHz 2.4 GHz 2.4 GHz
Approximate Indoor Range at 6 Mbps* 90 m 127 m 121 m 167 m
Approximate Indoor Range at 54 Mbps* 27 m 38 m 35 m 50 m
Beam Width 360°H, 80°V 80°H, 55°V 360°H, 30°V 47°H, 55°V
Cable Length 0.91 m** 0.91 m** 0.91 m 0.91 m
Dimensions 13.5 x 7.1 x 2.3 cm 12 x 17 x 2 cm 25.4 x 2.5 cm 18.4 x 12.7 cm
Weight 0.14 kg 272 g 454 g 227 g
Operating Temperature 0° to +55°C -30° to +70°C 0° to +70°C -30° to +70°C

* All range estimations are based on an external antenna associating with an integrated Intel Centrino client adapter under ideal conditions. The distances referenced here are approximations and should be used for estimation purposes only.

** The cable provided on noted antennas meets UL 2043 certification for plenum rating requirements set by local fire codes and supports installation in environmental air spaces such as areas above suspended ceilings.

Feature AIR-ANT1728 AIR-ANT4941 AIR-ANT2422DW-R AIR-ANT1729
Description Omnidirectional ceiling mount 2.2-dBi black dipole antenna 2.2-dBi white dipole antenna Patch wall mount
Application Indoor midrange antenna, typically hung from crossbars of drop ceilings Indoor omnidirectional coverage Indoor omnidirectional coverage Indoor/outdoor, unobtrusive, midrange antenna (may also be used as a midrange bridge antenna)
Gain 5.2 dBi 2.2 dBi 2.2 dBi 6 dBi
Frequency 2.4 GHz 2.4 GHz 2.4 GHz 2.4 GHz
Approximate Indoor Range at 6 Mbps* 116 m 91 m 91 m 123 m
Approximate Indoor Range at 54 Mbps* 35 m 27 m 27 m 37 m
Beam Width 360°H, 38°V 360°H, 65°V 360°H, 65°V 75°H, 65°V
Cable Length 0.91 m - - 0.91 m
Dimensions Length: 22.9 cmDiameter: 2.5 cm 14 cm 14 cm 10 x 13 cm
Weight 130 g 31 g 31 g 139 g
Operating Temperature 0° to +20°C 0° to +20°C 0° to +20°C 20º to +55ºC

* All range estimations are based on an external antenna associating with an integrated Intel Centrino client adapter under ideal conditions. The distances referenced here are approximations and should be used for estimation purposes only.

Feature AIR-ANT2485P-R AIR-ANT2460P-R AIR-ANT2465P-R
Description Patch wall mount Patch wall mount Diversity patch wall mount
Application Indoor, unobtrusive, long-range antenna (may also be used as a midrange bridge antenna) Indoor/outdoor, unobtrusive, midrange antenna (may also be used as a midrange bridge antenna) Indoor/outdoor, unobtrusive midrange antenna
Gain 8.5 dBi 6 dBi 6.5 dBi with two radiating elements
Frequency 2.4 GHz 2.4 GHz 2.4 GHz
Approximate Indoor Range at 6 Mbps* 155 m 123 m 127 m
Approximate Indoor Range at 54 Mbps* 47 m 37 m 38 m
Beam Width 66°H, 56°V 75°H, 73°V 75°H, 57°V
Cable Length 0.91 m 0.91 m 0.91 m**
Dimensions 13.5 x 13.5 x 1.9 cm 10.4 x 9.9 x 2.3 cm 12.7 x 17 x 2.5 cm
Weight 231.3 g 171.5 g 330.2 g
Operating Temperature -30° to +70°C -30° to +70°C -30° to +70°C

Table 2. Cisco Aironet 5 GHz Access Point Antennas with RP-TNC Connectors

Feature AIR-ANT5135D-R AIR-ANT5135DW-R
Description 3.5-dBi black dipole antenna 3.5-dBi white dipole antenna
Application Indoor omnidirectional coverage Indoor omnidirectional coverage
Gain 3.5 dBi 3.5 dBi
Frequency*** 5 GHz 5 GHz
Approximate Indoor Range at 6 Mbps* 206 m 206 m
Approximate Indoor Range at 54 Mbps* 21 m 21 m
Beam Width 360°H, 40°E 360°H, 40°E
Cable Length - -
Dimensions 13.5 x 1.5 cm 13.5 x 1.5 cm
Weight 28.3 g 28.3 g
Operating Temperature 0° to +20°C 0° to +20°C

* All range estimations are based on an external antenna associating with an integrated Intel Centrino client adapter under ideal conditions. The distances referenced here are approximations and should be used for estimation purposes only.

** The cable provided on noted antennas meets UL 2043 certification for plenum rating requirements set by local fire codes and supports installation in environmental air spaces such as areas above suspended ceilings.

*** 5 GHz antennas are denoted by either a blue dot on the radome or blue marker on the cable near the connector.

Feature AIR-ANT5145V-R AIR-ANT5160V-R AIR-ANT5170P-R AIR-ANT5195P-R
Description 4.5-dBi diversity omnidirectional ceiling mount 6 dBi omnidirectional antenna Diversity patch wall mount Patch wall or articulating mast mount
Application Indoor midrange antenna Indoor/outdoor midrange antenna Indoor/outdoor directional wall mount antenna Indoor/outdoor patch antenna provides different mounting options
Gain 4.5 dBi 6 dBi 7.0 dBi 9.5 dBi
Frequency*** 5 GHz 5 GHz 5 GHz 5 GHz
Approximate Indoor Range at 6 Mbps* 223 m 251 m 270 m 313 m
Approximate Indoor Range at 54 Mbps* 25 m 28 m 43 m 52 m
Beam Width 360°H, 50°E 360°H, 17°E 70° H, 50° V 50° H, 43° V
Cable Length 0.91 m 0.91 m 0.91 m 0.91 m
Dimensions 17.1 x 12.7 cm 30.5 x 2.5 cm 14.5 cm x 10.9 cm x 1.8 cm 12.9 cm x 12.9 cm x 2.5 cm
Weight 326 g 150 g 0.2 kg 0.2 kg
Operating Temperature 20° to +55°C -30° to +70°C -30° to +70°C -30° to +70°C

* All range estimations are based on an external antenna associating with an integrated Intel Centrino client adapter under ideal conditions. The distances referenced here are approximations and should be used for estimation purposes only.

** The cable provided on noted antennas meets UL 2043 certification for plenum rating requirements set by local fire codes and supports installation in environmental air spaces such as areas above suspended ceilings.

*** 5 GHz antennas are denoted by either a blue dot on the radome or blue marker on the cable near the connector.

2.4 GHZ AND 5 GHZ ACCESS POINT AND BRIDGE ANTENNAS WITH N TYPE CONNECTORS

Cisco offers antennas that can be used with both the 1400 Series Wireless Bridges and 1500 Series Lightweight Outdoor Mesh Access Points. The antennas, access points and bridges all utilize a robust N-type connector. Various gains and antenna types are available (Table 3).

Table 3. Cisco Aironet 2.4 GHz and 5 GHz Access Point and Bridge Antennas with N-Type Connectors

Feature AIR-ANT5175V-N AIR-ANT2455V-N
Description Omnidirectional Omnidirectional
Application Outdoor Outdoor, direct mount on unit
Gain 7.5 dBi 5.5 dBi
Frequency 4.9-5.8 GHz 2.4 GHz
Beam width 16°V 25° V
Cable Length 0.30 m None
Dimensions 30.48 cm x 2.54 cm 31.75 cm x 2.54 cm
Weight 17 kg 14 kg
Operating Temperature -30° to 70°C -30° to 70°C

Table 4 highlights the antennas for use with the Cisco Aironet 1400 Series Wireless Bridge featuring an N-type connector.

Table 4. Cisco Aironet 5.8 GHz Bridge Antennas with N-Type Connectors

Feature AIR-ANT58G9VOA-N AIR-ANT58G10SSA-N AIR-ANT58G28SDA-N
Description Omnidirectional mast mount Sector antenna, mast mount Dish antenna, mast mount
Application Outdoor short-range point-to-multipoint applications Outdoor medium-range point-to-point and point-to-multipoint applications Outdoor long-range directional connections
Gain 9.0 dBi 9.5 dBi 28.0 dBi
Frequency 5.8 GHz 5.8 GHz 5.8 GHz
Polarization Vertical Vertical or horizontal Field configurable Vertical or horizontal Field configurable
Elevation Adjustment None None +/- 12.5 degrees
Approximate Range at 9 Mbps* 13 km (with 22.5 dBi captive antenna on the remote site) 13 km (with 22.5 dBi captive antenna on the remote site) 37 km (with 28 dBi antennas on each end)
Approximate Range at 54 Mbps 3 km (with 22.5 dBi captive antenna on the remote site) 3 km with 22.5 dBi captive antenna on the remote site) 19 km (with 28 dBi antennas on each end)
Beam Width 360° H, 6° V 60° H, 60° V 5.7° H, 6° V
Supplied Jumper Cable Length 1.5 m 1.5 m 1.5 m
Dimensions Length: 46 cm Diameter: 2.5 cm Length: 6.4 cm Width: 6.4 cm Depth: 4.5 cm Diameter: 74 cm Depth: 36.8 cm
Weight 0.9 kg 0.6 kg 4.3 kg
Operating Temperature -20° to 60°C -20° to 60°C -30° to 60°C

2.4 GHZ BRIDGE ANTENNAS

Cisco Aironet bridge antennas allow for extraordinary transmission distances between two or more buildings. Available in directional configurations for point-to-point transmission and omnidirectional configuration for point-to-multipoint implementations, Cisco has a bridge antenna for every application (Table 5).

Table 5. Cisco Aironet 2.4 GHz Bridge Antennas with RP-TNC Connectors

AIR-ANT2506 AIR-ANT24120 AIR-ANT2414S-R AIR-ANT1949 AIR-ANT3338
Description Omnidirectional mast mount High-gain omni-directional mast mount Vertically polarized sector Yagi mast mount Solid dish
Application Outdoor short-range point-to-multipoint applications Outdoor midrange point-to-multipoint applications Outdoor long range point-to-multipoint applications Outdoor midrange directional connections Outdoor long-range directional connections
Gain 5.2 dBi 12 dBi 14 dBi 13.5 dBi 21 dBi
Approximate Range at 2 Mbps* 5.31 km 25.43 km 26.89 km 29.49 km 42.62 km
Approximate Range at 11 Mbps* 2.66 km 12.75 km 14.30 km 18.01 km 32.33 km
Approximate Range at 54 Mbps* 0.34 km 1.6 km 2.02 km 2.27 km 7.17 km
Beam Width 360°H, 38°V 360°H, 7°V 90°H, 8.5°V 30°H, 25°V 12.4°H, 12.4°V
Cable Length 0.91 m 0.30 m 1.5m 0.91 m 0.61 m
Dimensions Length: 33 cm Diameter: 2.5 cm Length: 107 cm Diameter: 3.8 cm Length: 91 cm Width: 15 cm Length: 46 cm Diameter: 7.6 cm Diameter 61 cm
Weight 170 g 0.68 kg 3 kg 0.68 kg 5 kg
Operating Temperature -30° + 70°C -30° to +70°C -30° to +70°C -30° to +70°C -30° to +70°C

* All range estimations are based on use of a BR 1310 access point and the same type of antenna at each end of the connection under ideal outdoor conditions. The distances referenced here are approximations and should be used for estimation purposes only.

Figure 1. Optional, Higher-Gain Antennas Extend the Range of Access Points

LOW-LOSS/ULTRA-LOW-LOSS CABLES

Low-loss cables extend the length between any Cisco Aironet 2.4 GHz and 5 GHz radio and the antenna with RP-TNC connectors. With a loss of 6.7 dB per 100 feet (30 m for the low-loss cable and 4.4 dB for the ultra-low-loss cable, this provides installation flexibility without a significant sacrifice in range (Table 6).

Table 6. Cisco Aironet Low-Loss Antenna Cable Features

Feature AIR-CAB020LL-R AIR-CAB050LL-R AIR-CAB100ULL-R AIR-CAB150ULL-R
Cable Length 6 m 15 m 30 m 46 m
Transmission Loss @ 2.4 GHz 1.3 dB 3.4 dB 4.4 dB 6.6 dB

With Cisco Aironet bridge antennas, the right mounting hardware, and qualified installation, wireless links over great distances and obstacles are possible (Figure 2).

Figure 2. Crossing Great Distances with Cisco Aironet Bridge Antennas

ACCESSORIES

To complete an installation, Cisco provides accessories that offer increased capabilities, safety, and convenience (Figure 3; Table 7).

Figure 3. Cisco Aironet Antenna Accessories for use with RP-TNC Connectors

Table 7. Cisco Aironet Accessory Features

Feature AIR-ACC2537-060 AIR-ACC245LA-R AIR-ACC2662
Description 152 cm bulkhead extender 2.4 GHz and 5 GHz lightning arrestor Yagi articulating mount
Application Flexible antenna cable that extends access point cabling, typically within an enclosure Supports both 2.4 GHz and 5 GHz applications; Helps prevent damage due to lightning-induced surges or static electricity; helps prevent damage due to lightning-induced surges or static electricity Adds swiveling capability to mast-mounted Yagi antennas

POWER INJECTOR CABLES FOR CISCO AIRONET 1400 SERIES WIRELESS BRIDGES

Typical installations will place the outdoor unit on an external mast with the power injector unit placed indoors. These cables come with a pair of F-type connectors on each end. To allow flexibility in the distance between the units, a variety of cables are available (Table 8).

Figure 4. Cisco Aironet Power Injector Cables

Table 8. Cisco Aironet Power Injector Cable Features

Feature AIR-CAB020DRG6-F= AIR-CAB050DRG6-F= AIR-CAB100DRG6-F
Cable Length 6m 15m 30m

ACCESSORIES

To complete an installation, Cisco provides a variety of accessories that offer increased functionality, safety, and convenience (Figure 5; Table 9).

Figure 5. Cisco Aironet 1400 Series Bridge Accessories

Table 9. Cisco Aironet 1400 Series Bridge Accessory Features

Feature AIR-ACCRWM1400 AIR-ACCBRGB= AIR-ACCMFM1400=
Description Roof/Wall mount kit Grounding block Multifunction mount
Application Allows mounting to flat surfaces

Includes full elevation and azimuth adjustment

Helps prevent damage due to lightning-induced surges or static electricity Allows mounting to poles with a diameter between 1.5 in. and 2.5 in.

Includes both elevation and polarization adjustment

CISCO AIRONET 1300 SERIES MOUNTING HARDWARE

In addition to the antennas available from Cisco, the Cisco 1300 Series has different mounting options (Figure 6). These optional mounting kits are available for mounting to a roof, wall, or pole. The quick-hang mounting bracket allows a simple one-person installation.

Figure 6. Cisco Aironet 1300 Series Mounting Hardware

MOUNTING KITS FOR CISCO AIRONET 1300 SERIES OUTDOOR ACCESS POINT/BRIDGES

A roof-mount kit is available for use with Cisco Aironet 1300 Series outdoor access points/bridges (integrated antenna and connectorized versions). A wall-mount kit is available for use with Cisco Aironet 1300 Series outdoor access points/bridges with RP-TNC type connectors. The wall-mount kit is for indoor use only. These kits must be ordered separately (Table 9).

Table 10. Mounting Kits for Cisco Aironet 1300 Series Outdoor Access Points/Bridges

Product Number Product Description
AIR-ACCWAMK1300= Cisco Aironet 1300 Series Wall-Mount Kit for use with AIR-BR1310G-x-K9-R

Kit includes:

  • Two 1-ft RG-59 power injector cables
  • Wall-mount bracket
  • Mounting hardware
AIR-ACCRMK1300= Cisco Aironet 1300 Series Roof-Mount Kit for use with AIR-BR1310G-x-K9

Kit includes:

  • Roof-mount mast (pole and mounting base)
  • Multifunction mount (allows mounting to roof-mount mast, or directly to a wall)
  • Mounting hardware
  • 20-ft dual RG-6 cable assembly with F-Type connectors
  • 50-ft dual RG-6 cable assembly with F-Type connectors
  • Coaxial sealant
  • One Cisco Aironet grounding block
  • Grounding lug
  • Anticorrosion gel
  • U-bolts
  • Coaxial sealant
  • Optional 100-ft dual RG-6 cable available separately

CISCO AIRONET 1500 SERIES ACCESSORIES

In addition to the antennas offered by Cisco for the 1500 Series, there are various accessories that are available (Table 11).

Table 11. Cisco Aironet 1500 Series Accessories

Product Number Product Description
AIR-ACCPMK1500= Pole Mount Kit
AIR-PWR-ST-LT-TAP= Streetlight Power Tap, 105-260 VAC
AIR-PWRINJ1500= Power Injector, In 100-240VAC, Out 48 VDC
AIR-ETH1500-150= Outdoor Ethernet Cable, 150 ft.
AIR-LAP1510KITP-A Pole-Top Kit, 2.4 Omni 5 GHz Omni
AIR-LAP1510KITRO-A Roof-Top Kit, 2.4 Omni 5GHz Omni
AIR-LAP1510KITRS-A Roof-Top Kit, 2.4 Omni 5GHz Sector